- Katılım
- 24 Ocak 2010
- Mesajlar
- 100
- Tepkime puanı
- 7
- Puanları
- 0
- Enst.
- Roland FA-06 & Casio XW-P1
M50 Music Workstation Specifications
M50-61/73: Semi-Weighted Natural Touch, M50-88: Real Weighted Hammer Action (RH3) (velocity only)
* The key weight of the RH3 keyboard differs in four stages across the pitch range (with low notes being heavier, and high notes being lighter), delivering a playing feel similar to that of a grand piano.
M50-61/M50-73: Natural Touch Keyboard (velocity only)
System
EDS (Enhanced Definition Synthesis)
Sound Engine
Maximum Polyphony: 80 voices max, single mode/40 voices max, double mode
* The actual maximum polyphony will vary depending on oscillator settings such as stereo multisamples and velocity crossfading.
Preset PCM: 256 Mbytes (when calculated as 16-bit linear data)/1,077 multisamples (including seven stereo), 1,609 drum samples (including 116 stereo)
Programs:
-Oscillator: OSC1 (Single), OSC1+2 (Double): Stereo multisamples are supported/ 4 velocity zones per oscillator, with switching, crossfades and layers.
-Filters: Four types of filter routing (single, serial, parallel, 24 dB), Two multi-mode filters per voice (low pass, high pass, band pass, band reject)
-Driver： Per-voice nonlinear driver and low boost.
-EQ: Three bands, with sweepable mid.
-Modulation: For each voice, two envelope generators (Filter & Amp), two LFOs, two key tracking
generators (Filter & Amp), and two AMS mixers. In addition, pitch EG, common LFO, and two common key tracking generators
Combinations:
-16Timbres: Up to sixteen timbres, keyboard and velocity split/layer/crossfade, and modifications to the program setting via the Tone Adjust function .
-Master Keyboard functionality: Allows you to control external MIDI devices
Drum Kits:
Stereo and mono drumsamples. 4-way velocity switches with crossfades and adjustable crossfade shapes (Linear, Power, Layer).
User Combinations: 512 Combinations/384 Preload
User Programs: 640 Programs/608 Preload
User Drum Kits: 48 Drum Kits/32 Preload
Preset Programs: 256 GM2 Programs + 9 GM2 Drum Programs
Effects
5 Insert Effects (In-line processing; stereo in - stereo out.), 2 Master Effects (Two effects; sends stereo in - stereo out.), 1 Total Effect (For overall processing on the main outputs, such as compression, limiting, and EQ; stereo in - stereo out.), 3-band Track EQ (High, low, and sweepable mid band. Per Program in Program Mode, per Timbre in Combination mode (16 total), and per Track in Sequencer mode (16 total).)
Effects types: 170 types Usable for insert, master, or total effects. Note: double-size effects cannot be used as the total effect.
Modulation: Dynamic Modulation, two common LFOs
Effects Control Bus: Stereo side-chaining for limiter, gate, vocoder, etc.
Effects Presets: Up to 32 per Effect
Dual polyphonic arpeggiators
Program mode: one arpeggiator available. Combination and Sequencer modes: two arpeggiators available. 5 preset arpeggio patterns, 1028 user arpeggio patterns (900 preload)
Drum Track
Preset patterns: 671 patterns (Held in common with sequencer preset patterns.)
User patterns: 1,000 patterns. Patterns created in Sequencer mode can be converted to drum track user patterns.
Trigger Mode / Sync / Zone settings can be specified
Sequencer
16MIDI Tracks & 1 Master Track, 128 Songs, Resolution: 480 ppq (parts per quarter-note), Tempo: 40.00–300.00 bpm (1/100 bpm resolution), Up to 210,000 MIDI events, 16 preset/16 user template songs, Cue List function: 20 Cue Lists. Songs can be arranged consecutively or repeatedly in up to 99 steps. A Cue List can be converted back into a song. Patterns/RPPR: 671 preset /100 user patterns (per Song), RPPR (Realtime Pattern Play/Recording): 1 set per Song. Format: Korg (M50) format, SMF (formats 0 and 1) supported
Media
Load, Save, Utility
Data Filer functionality (Save and Load MIDI System Exclusive Data)
Controllers
Joystick, SW1, 2
Chord trigger switches: Chord trigger switches 1–4 (non velocity sensitive), CHORD ASSIGN switch
Control Surface: -CONTROL ASSIGN Switches (REALTIME CONTROL, EXTERNAL, ARP) -RESET CONTROLS Switch -4 knobs (REALTIME CONTROL: Realtime modulation, EXTERNAL: External mode. External MIDI control, Arpeggio control)* In External mode, the four knobs andfour chord trigger switches can be used as MIDI controllers. 128 setups can be stored. (102 are preloaded. These allow you to control software synthesizers or DAW software.)
Drum Track: ON/OFF
Arpeggiator: ON/OFF
User Interface
Display: TouchView grey-scale graphical user interface, 320 x 240 pixel display
MODE: Switches = COMBI, PROG SEQ, GLOBAL, MEDIA
Value Controllers: Switches = Up/Down, 10-key numeric keypad, -, (.), ENTER, COMPARE, VALUE Slider, VALUE Dial
BANK: Switches = A…GM (used for Combination A, B, C, D)
SEQUENCER: Switches = PAUSE, REW, FF, LOCATE, REC/WRITE, START/STOP
TEMPO: Switches = TAP TEMPO, TEMPO Knob
Other: Switches = PAGE SELECT, EXIT, VOLUME Slider, display contrast
Audio Outputs (Analog)
AUDIO OUTPUT, L/MONO, R:
1/4" TS (Mono), unbalanced, Volume slider controls only L/Mono and R
Output Impedance = 1.1kΩ stereo; 550Ω mono (L/Mono only), Maximum Level = +16.0 dBu , Load Impedance = 10 kΩ or greater
Headphone output:
1/4" TRS (Stereo), Volume slider
Output Impedance = 33Ω, Maximum Level = 32+ 32 mW @33Ω
Control Inputs
DAMPER (Supports piano-style half-damper pedals as well as standard foot switches), ASSIGNABLE SWITCH, ASSIGNABLE PEDAL
MIDI
IN, OUT
USB
1 USB (TYPE B), MIDI interface
SD-Card slot
Capacity recognized: FAT32: 2 Gigabytes (GB). SDHC memory cards are not supported.
Power
AC adapter power supply connector (DC 12V 3500mA), POWER On/Off switch
Dimensions (W × D × H)
M50-61: 1,027 × 294 × 106 (mm)/40.43" ×11.69" × 4.17"
M50-73: 1,191 × 294 × 106 (mm)/46.90" ×11.69" × 4.17"
M50-88: 1,409 × 328 ×151 (mm)/55.47" × 12.91" × 5.94"
Weight
M50-61: 6.8 kg/14.99 lbs.
M50-73: 8.2 kg/18.08 lbs.(tentative)
M50-88: 20.8 kg /45.86 lbs.
Power Consumption
35W
Accessories
AC adapter, Owner’s Manual, CD-ROM (M50 Parameter Guide (PDF), Installation Guide (PDF), External Setups PDF, KORG USB-MIDI driver, M50 Editor/Plug-In Editor etc.)
M50 Options
XVP-10: Expression/Volume Pedal
EXP-2: Foot Controller
DS-1H: Damper Pedal
PS-1: Pedal Switch
Operating requirements
KORG USB-MIDI driver
Windows
Computer: USB port required (a USB host controller made by Intel is recommended)
Operating system: Microsoft Windows XP Home Edition/Professional/x64 Edition Service Pack 2 or later (the MIDI driver for the x64 Edition is a Beta version), All editions of Microsoft Windows Vista Service Pack 1 or later (the MIDI driver for the 64-bit Edition is a Beta version)
Macintosh
Computer: USB port required
Operating system: Mac OS X 10.3.9 or later
M50 Editor and M50 Plug-In Editor
Windows:
• Computer
CPU: Intel Pentium III / 1 GHz or better, Pentium D or Core Duo or better is recommended
Memory: 512 MB or more (1 GB or more is recommended)
Monitor: 1,024 x 768 pixels, 16-bit color or better
A computer that satisfies the operating requirements of Windows XP or Windows Vista, and has a USB port
• Operating system
Microsoft Windows XP Home Edition/Professional Edition Service Pack 2, Windows Vista Service Pack 1
and all later editions (64-bit versions excepted)
Macintosh:
• Computer
CPU: Apple G4 800 MHz or better (Intel Mac is supported), G5 or Core Duo or better is recommended
Memory: 512 MB or more (1 GB or more is recommended)
Monitor: 1,024 x 768 pixels, 32,000 colors or better
An Apple Macintosh computer that satisfies the operating requirements of Mac OS X and has a USB
port
• Operating system
Mac OS X version 10.4.11 or later
*Formats supported by M50 Plug-In Editor
Windows: VST, RTAS
Macintosh: VST, Audio Unit, RTAS
* M50 Plug-In Editor must also satisfy the operating requirements of the host application.
*You cannot run multiple instances of the M50 Editor and M50 Plug-In Editor in the operating system. This means that you can’t use this editor to edit two or more M50 units simultaneously.
